公告:服务器迁移已顺利完成! 网址全面启用 https

服务器2号 服务器3号 服务器4号 服务器5号

申请VIP无广告,支付宝,微信,USDT!
在线客服请尝试以下不同链接如果进不了的话在线客服(1) (2) (3) (4) (5) (6)
(7) (8) (9) 实时开通

查看完整版本: 斐讯K3拆解,看看1999元的路由器内部做工![23P]

斧王峨 2017-3-23 08:39

斐讯K3拆解,看看1999元的路由器内部做工![23P]

我们姑且不论k3是否会翻车,就从硬件角度好好看看这货值不值1999
昨天下单的K3今天到了,先拆了看看里面到底怎么样
[img=800,1067]http://p3.pstatp.com/large/19ee00006c63fa74ef37[/img]

螺丝在脚垫下,一共4颗
[img=800,1067]http://p1.pstatp.com/large/192400066af12f0e19d5[/img]

然后拆掉侧面板,是卡扣的,这边可以看到3根天线
[img=800,1067]http://p3.pstatp.com/large/192400066aede2f17a27[/img]

反面也一样,已经可以看到覆盖有巨大散热片的主板了,上方是另外5根天线,一共8根,2.4G的宽一些,2.4G和5G的天线是间隔放置的
[img=800,1067]http://p3.pstatp.com/large/192300066f16466e3ef8[/img]

拿开上部天线支架,可以取下天线
[img=800,1067]http://p9.pstatp.com/large/192300066f1585e1e2de[/img]

取下天线后,下方排线是链接顶部小屏幕的
[img=800,600]http://p3.pstatp.com/large/1927000663c0e23d0fab[/img]

拧下链接塑料壳的4个螺丝,就可以取下主板了
[img=800,600]http://p1.pstatp.com/large/192500065d9a185b4c26[/img]

主板背面,可以看到是由2片主板插在底板上的,很像一块显卡
[img=800,600]http://p3.pstatp.com/large/19ee00006c5a80b4cbab[/img]

取下底板,拧开固定前后主板的固定螺丝
[img=800,600]http://p3.pstatp.com/large/192300066f0f8aeba9ed[/img]

分开前后主板,可以看到前后主板都有散热片固定
[img=800,600]http://p3.pstatp.com/large/192500065d950b948398[/img]

拧开螺丝,取下散热片[img=800,600]http://p3.pstatp.com/large/192500065d9494e7af5e[/img]

这是背面,可以看到大量过孔和露铜加强散热
[img=800,600]http://p3.pstatp.com/large/19ed00006c8f452479f5[/img]

拆开屏蔽罩,就可以看到各个芯片了
下面逐一看看各个芯片
[img=800,665]http://p3.pstatp.com/large/19ed00006c8c99889c9c[/img]

FLASH芯片,128M的
[img=800,754]http://p9.pstatp.com/large/192500065d9132f6486d[/img]

缓存,256Mx16,容量512M
[img=800,585]http://p1.pstatp.com/large/19ed00006c8890043aa8[/img]

CPU,BCM4709C 双核1.4G
[img=800,591]http://p3.pstatp.com/large/19ed00006c8456315b8b[/img]

网络芯片,BCM4366,2.4G和5G都是这颗芯片
4×4 MU-MIMO处理器,支持NitroQAM调制技术
[img=800,600]http://p1.pstatp.com/large/192500065d8c1a7f31ba[/img]

5G部分布局
[img=800,606]http://p1.pstatp.com/large/19ed00006c825ea6c68e[/img]

5G采用PA5542功率放大器
[img=800,600]http://p3.pstatp.com/large/192400066ad6875636bd[/img]
2.4G部分布局
[img=800,628]http://p3.pstatp.com/large/1927000663afd224bad2[/img]

2.4G采用SKY2623L功率放大器
[img=800,592]http://p3.pstatp.com/large/19ee00006c4b953086b0[/img]

2.4G采用SKY15201射频开关
[img=800,1067]http://p3.pstatp.com/large/192300066efabcf9f558[/img]

最后是上方的显示小屏幕
一片PIC32MZ1024ECH100单片机
[img=800,600]http://p1.pstatp.com/large/19ee00006c491a764f44[/img]

三颗按键是触控的
说下设计吧,8根独立天线,虽然是内置,但是效果和外置是没区别的,你可以当作是不可变换角度的8根外置天线,散热设计很到位,前后都有,芯片背面都有大量过孔和留出大面积露铜散热,usb3.0全方位屏蔽罩,cpu和无线独立2块主板,可以说设计上一点都不差,然后硬件,这套硬件华X,网X都是1500元以上的价格,加上特有独立单片机的屏幕,首发送的1t硬盘,个人认为1999的价格就算翻车也不亏,不翻车就赚大了!
页: [1]
查看完整版本: 斐讯K3拆解,看看1999元的路由器内部做工![23P]